地埋线探测仪使用方法

　     Methods of using buried line detectors

　　使用地埋线探测仪的步骤如下：

　　The steps to use a buried wire detector are as follows:

　　1.准备设备。确保地埋线探测仪放置在平稳的地面上并插入电源，正确安装探测线圈并校正设备以确保探测准确性。

　　1. Prepare the equipment. Ensure that the buried wire detector is placed on a stable ground and plugged into the power supply, correctly install the detection coil, and calibrate the equipment to ensure detection accuracy.

　　2.发射机设置。开机后长按电源键，选择检测频率并确认，调节输出档位和输出功率，确保连接稳固并接触良好。

　　2. transmitter settings. After turning on, press and hold the power button, select the detection frequency and confirm, adjust the output gear and output power to ensure a stable connection and good contact.

　　3.接收机设置。开机后选择与发射机相同的检测频率，选择检测模式（宽峰、峰值、峰值箭头、谷值），调节增益，使用测深按键进行测深。

　　3. Receiver settings. After turning on, select the same detection frequency as the transmitter, select the detection mode (wide peak, peak, peak arrow, valley), adjust the gain, and use the depth measurement button for depth measurement.

　　4.直连法操作。确保连接稳固，将输出线红色鱼夹与测试桩测试线连接，黑色鱼夹拉与管道走向垂直方向，黑色接地线完全插入土壤中，选择潮湿湿润的土壤。

　　4. Direct connection method operation. Ensure a stable connection, connect the red fish clip of the output line to the test line of the test pile, pull the black fish clip perpendicular to the direction of the pipeline, fully insert the black grounding wire into the soil, and choose a damp and moist soil.

　　5.探测操作。将探测线圈靠近地面并沿着要探测的区域慢慢移动，当探测线圈上的指示灯亮起时，表示该位置探测到了地埋线。

　　5. Detection operation. Move the detection coil closer to the ground and slowly along the area to be detected. When the indicator light on the detection coil lights up, it indicates that the buried line has been detected at that locations.

　　6.数据处理。使用自带的数据处理软件对数据进行处理和分析，将设备连接到电脑上，打开数据处理软件，将探测仪中存储的数据导入到软件中进行处理。

　　6. Data processing. Use the built-in data processing software to process and analyze the data, connect the device to the computer, open the data processing software, and import the data stored in the detector into the software for processing.

　　此外，在使用地埋线探测仪时，应注意，避免在强磁场、电磁干扰、电力交流强干扰等环境下使用，确保探测数据的准确性和可靠性。

　　In addition, when using underground wire detectors, safety should be taken into consideration to avoid using them in environments with strong magnetic fields, electromagnetic interference, and strong electrical and AC interference, ensuring the accuracy and reliability of detection data.

　　本文由地埋探测提供技术支持，更多的详细精彩内容请点击我们的网站http://www.lnszgh.com们将会全心全意为您提供满意的服务。